SCX24 Prerunner Kit for MEUS MB24

Introducing the Prerunner kit for the MEUS MB24, featuring independent front suspension, trailing arms, sway bar compatibility, and more! This kit uses the body, cage, and chassis rails from the Meus MB24 kit, as well as a stock style skidplate. It is a RWD only setup, ideally paired with the Meus SCX24 rear axle. The independent front suspension is derived from the MicroRunner kit that is also available on my Etsy, with scale travel, swing-set steering, and scale looks. 

This kit will REQUIRE FULL ASSEMBLY and DOES NOT INCLUDE any of the following; Meus MB24 kit, carbon chassis, body and cage, sway bars, rear axle, front axle stubs, skid plate, shocks, or electronics. 

Assembly Video: https://youtu.be/04GOuC7xHFk

This kit does include the following;
-Hardware for complete assembly, screws and bushings
-Independent front suspension assembly 
-Sliders and electronics tray
-Rear trailing arms and upper links
-Servo mount, sway bar mounts, shock mounts

Included in PRO KIT: 
-Everything included with standard MB24 Prerunner Kit
-NEW Turbine 1.0 Wheels with hardware
-Paddle tires
-Inserts (please specify which size in your order comment or reach out to me!)
-12, 16, and 17mm motor mounts

*What you will need to complete the kit*
-Front axle stubs; This is the only necessary modification to build this kit, the cup has to be shaved off of a stock front axle stub to fit the IFS
-Sway Bars; I recommend the sway bars made by SWD_RC on Instagram and TikTok. He is amazing to work with and knows which sway bars fit this chassis kit. If you do not have social media please let me know and I will put you in touch with him.
-Wheels: Zero offset or negative offset wheels will be best for this chassis kit, that will ensure the least amount of trimming and no interference with the IFS. 
-Tires; I recommend 52-56mm tires for a scale look, but most tires will clear the Meus body. 
-Electronics (ESC, Receiver, Battery) I highly recommend a receiver with a gyro, this will make driving much easier.
-Motor; I recommend a sealed brushless motor, see youtube video for more information
-Servo; Fits emax and larger brushless servos like the Injora 11kg
-Metal transmission and driveshaft ( REAR ONLY scx24 C10, JLU, Bronco length)
-Rear axle; I recommend the MEUS rear axle, either the metal or nylon one. The hex width will be the same as the IFS and no spacers or modification will be needed.
-Suspension; I highly recommend oil filled shocks, otherwise it will be quite bouncy. The ones made for the AX24 are around 50-55mm eye to eye and are perfect for both the IFS and rear trailing arms.

Disclaimers
-This kit REQUIRES ASSEMBLY. A high level of experience with the SCX24 platform is recommended for assembly. I am not responsible for broken parts due to improper installation. A detailed assembly video is linked above
-Many SCX24 and AX24 parts are not meant for faster builds, you may experience increased wear and tear on parts.
-Aside from the hardware, this kit is fully 3d printed. It will warp if left exposed to heat or sunlight, it is more brittle than molded plastic, and it may have visual imperfections and layer lines.
-I am very pleased with the durability of it, but if anything from this kit breaks please reach out to me with pictures and a description of what happened, so that we can find a solution and I can continue to improve my products. I love driving my RCs and hate when they are broken, so I am always ready to help get your rigs back on the dirt if anything does happen!
-Just like plastic parts on a regular RC car, the printed parts on this kit will wear out over time. I have adjusted tolerances for each and every part to ensure the best fit, so some hardware may seem a little snug at first. It will break in during the first couple drives, ensuring the ideal fit and the least amount of play in your suspension.

WARNING: CHOKING HAZARD – Small parts. Not for children under 3 yrs.